Home > Domestic Vehicle Bolt Dress Kits > Jeep Grand Cherokee (2005-2015) > WK1: Jeep 2005-2010
Sort By:
Page of 1
Jeep WK1 Coolant Tank Kit
Our Price: $12.00
The following comes with the kit:
-1 Bolt
-1 Washer
-1 Nut
The West Coast Fasteners Z-bracket dress kit upgrades the exposed hex head bolt to a nice stainless steel bolt with a tapered washer. We also replace the black oxide bolt on the top of the Z bracket with a stainless steel or titanium bolt.

The kit comes with the following:

-2 Bolts
-1 Washer


Fitment for: 2005 to current model LX.

1st gen these locations are very exposed. 2nd and 3rd gen is not as prominent.

Jeep WK1 Hood Striker Kit
Our Price: $22.00
The hood striker kit is a quick and simple way to clean up the old and tired bolts that secure your hood striker. Did you recently chrome your striker or are running a hood prop? Complete your presentation by upgrading to a West Coast Fasteners dress kit.

The following comes with this kit:
-2 Bolts
-2 Anodized Washers
Is the hardware on your front WK1 SRT Bumper/Fascia Support rusted, worn out, or just missing? West Coast Fasteners has a solution for you.

The following comes with the kit:

-4 Bolts
-4 Washers
-Nut Kit*

*The nut kit is included for those that have lost their hardware that attaches to the front bumper (2 per side)

The idler pulley hardware is a commonly overlooked piece, but is clearly in the open and looks amazing once the West Coast Fasteners Dress kit is installed.

The following hardware comes with the kit:

- 2 Bolts
- 2 Washers

The West Coast Fasteners BT Coil Pack Cover dress kit replaces the standard hex head bolts, with upgraded washers and bolts!


The dress kit comes with the following:


-4 Bolts (16 Bolts for the Full Kit)
-4 Washers (16 Washers for the Full Kit)

This dress kit is for Hemi equipped vehicles.
Do you have the Billet Technology UniStruts and would like to add a little personal touch? West Coast Fasteners has an anodized washer upgrade in the following colors:

Silver, Black, Red, Blue, Purple, Gold, and Orange

The following is included in the dress kit:

-6 Aluminum Washers (Only 3 are needed for Hellcats)*

*To complete the Hellcat look, West Coast Fasteners recommends the Coolant Tank Secondary Reservoir kit that contains 3 Titanium Nuts and 3 Washers.

The Throttle Body and Intake Bracket dress kit cleans up the nose of the engine nicely.

This throttle body kit covers the following:

  1. 4 Bolts *****(Titanium upgrade option is ONLY available for 1st gens and Hellcats)*****
  2. 4 Washers

Washer Colors Available: Aluminum, Black, Blue, Gold, Purple, Red, and Orange

The optional Allen key is provided just as an aid during install. A torque wrench is recommended for final tightening with factory torque specs.

These are an often overlooked piece considering they stick out like a sore thumb! These black bolts are located right next to the valve cover bolts at the top (front and rear).

The following is included:

-4 Bolts
-4 Washers

Picture shows the front passenger side head bolt and BT z-Bracket bolt being upgraded with West Coast Fasteners hardware.

West Coast Fasteners offers both this regular duel rail dress kit as well as our spiked edition.

The following comes with this specific kit:

-4 Bolts*
-4 Washers (Tapered style)

*Burnt titanium only offered for 1st Gens.

Replace the front 4 bolts (2 per side) that secure the headlights/support down.

The following comes with the kit:
-4 Bolts
-4 Anodized Washers
Hemi Spiked Fuel Rail Kit
Our Price: $59.00
West Coast Fasteners dug deep in to the Hemi engine and figured out a way to truly pimp out a power steering pump. The power steering pump kit replaces the hardware that mounts the power steering pump to the engine.

The following comes with the dress kit:

-3 Bolts***
-3 Washers***

***Photo was for demo purposes to show the 4 rear bolts (that cannon be seen once installed & the 1 bolt that holds the neck on to the pump)
Upgrade the nuts on the Jeep Wk1 hood latch to titanium and add a little flare to it by selecting your preferred nut washer color.

The following comes with the kit:
-2 Titanium Nuts
-2 Finishing Washers

With many people asking for spiked options, West Coast Fasteners created the LX Spiked Fuel rail kit to match the LX Strut Spike kit & the LX Ground Spike!

The following is included in this kit:

  1. 4 Spikes
  2. 4 Washers (Select color of choice)
  3. 4 Spike thread kits

***The Allen key option will help with half of the install. You still need to use a wrench to tighten the spiked hardware down. Factory engine covers and half covers must be trimmed or removed to allow clearance for spikes. Billet technology coil pack covers will clear the spikes no problem.

Fitment for 6.1 2005-2010 Charger, 2005-2010 Challenger, 2005-2010 300c, 2005+ Magnum. WK Jeep

West Coast Fasteners is always working to perfect design. Rather than make a band aid solution, we aren't afraid for customers to remove the hideous set screws that come from the factory and replace them with beautiful bolts and washers.

The kit covers the following:

  1. Water Pump: 4 bolts and washers (Set Screw has to be removed to install 1 Bolts and washer)
  2. Timing Cover: 1 bolt and washer (The set screw above the water pump must be removed to use)***

This West Coast Fasteners dress kit covers the following:

-5.7 Manifold Bolts w/ Washers
-6.1 Manifold Bolts w/ Washers
-6.4 Manifold Bolts w/ Washers

Do you have a Billet Technology catch can, but would like a different look or upgrade from the rubber hoses you have now? Then this is the perfect option for your ride.


We also carry the Billet Technology Catch can, which can also be added to your shopping cart by going to the Billet Technology Hardware section of our website.

***This item does not include the actual oil catch can itself as that has to be purchased separately.

For the rare few that got their hands on this discontinued piece of art, West Coast Fasteners has a hardware upgrade kit for you.

The following comes with the kit:

-14 Bolts
-14 Washers

The coil pack kit comes with the following:

16 Stainless Bolts
16 Washers


The Billet Technology Coil Pack cover dress kit comes with the following:

4 Bolts
4 Washers


Upgrade your factory WK1 Strut tower nuts to titanium and add in some colors with the anodized finishing washers.

The following items are included in the kit:
-4 Titanium Lock Nuts
-4 Finishing Washers

West Coast Fasteners steps it up once again not only by offering the "Max Taper" washers.

This valve cover kit comes with the following:

  1. 20 Bolts
  2. 20 Washers

It is recommended for OEM Valve cover owners to reuse the factory rubber and metal gaskets. BT valve covers you can run the kit as is.

The optional Allen key is provided just as an aid during install. A torque wrench is recommended for final tightening with factory torque specs.
Upgrade the bolts on your front fenders and hood hinges!

The following comes with the kit:
-12 Bolts (6 per side)
-12 Anodized washers (6 per side)