Home > Billet Technology Hardware > 1st Gen (2005-2010)
Sort By:
Page of 1
Billet Technology EGR Blockoff Plate (5.7 Hemi Only) Billet Tech UniStrut Dress Kit Billet Technology Water Neck 2005 Plus (5.7/6.1)
Tired of the ugly EGR tube that runs across of your 5.7 Hemi? Why not install our EGR Block Off Plate Kit to get rid of that ugly tube for that old school V-8 look?

Installation is a snap. Use all the stock hardware including the stock gaskets. We supply the hardware for the plate on top of the manifold

Works on all Charger, Magnum, Challengers and 300's. Also works on 2003-2008 Dodge Ram Trucks
Works ONLY with 5.7L Hemi Engines.

***You must have a Diablosport Predator and the tuning software for the EGR to be disabled.
***Photo has West Coast Fasteners EGR Delete dress Kit installed as is sold separately.
Do you have the Billet Technology UniStruts and would like to add a little personal touch? West Coast Fasteners has an anodized washer upgrade in the following colors:

Silver, Black, Red, Blue, Purple, Gold, and Orange

The following is included in the dress kit:

-6 Aluminum Washers (Only 3 are needed for Hellcats)*

*To complete the Hellcat look, West Coast Fasteners recommends the Coolant Tank Secondary Reservoir kit that contains 3 Titanium Nuts and 3 Washers.
This product fits the following vehicles:
  • 2005-2008 Dodge Magnum 5.7 and 6.1 Hemi's
  • 2006-2014 Dodge Charger 5.7 and 6.1 Hemi's
  • 2008-2014 Dodge Challenger 5.7 Hemi
  • 2008-2010 Dodge Challenger 6.1 Hemi
  • 2005-2014 Chrysler 300 5.7 Hemi
  • 2010-2014 Dodge Ram 5.7L Hemi
***If you have an oil cooler installed choose the tapped option when checking out. Fitting is included when choosing tapped option.
Jeep WK1 Lower Front Bumper / Brace Dress Kit Billet Technology Oil Catch Can (5.7 / 6.1) LX Jeep WK1 Sideskirt / Inner Fenderliner Dress Kit
The following comes with the kit:
-11 Bolts (
-11 Washers
- Custom Nut Kit

4 Bolts/Washers from the above list attach to the bumper support bars on the front side and also the backside where they mount to the lower cross member.

Fits Jeep SRT8, but may fit others as well.

  • Approved by Mopar Performance
  • The Original Dual Chambered Top
  • Machined from domestic certified, solid 6061-T6 aircraft aluminum
  • All cans are sealed and secured
  • Added O-Ring feature provides a complete seal
  • Mounts available for a clean fit for ALL applications
    • the way you want it now
  • All hose options are oil resistant
  • Fittings and installation hardware included
    • Variety of fitting finishes available
    • Some Options may incur Additional Cost
  • Knurled bottom for sure grip and easy empty design
  • Manufactured in the USA
  • The Jeep WK1 SRT8 naturally sits a bit high even when lowered so the OEM plastic clips are very exposed. Upgrade to a stronger, more durable, and custom hardware setup now!

    The following comes with the kit:
    -18 Bolts
    -18 Washers
    - Custom Nut Kit

    Fits Jeep SRT8, but may fit others as well.
    Billet Technology Uni-Strut Design Covers Billet Technology Signature Series Overflow Catch Can Billet Technology Strut Covers Devo
    After many years of listening to customers for a solid one piece design on strut covers, Billet Technology produced this fantastic 2 piece kit.

    Standard Hardware - No nuts will come with the kit. Meaning you will need your own nuts or the stock nuts.

    Machined from solid 6061-T6 certified domestic aircraft aluminum this 2 pc kit will look awesome on the following cars:
    • 2005-2008 Dodge Magnum
    • 2006-2015 Dodge Charger (Hellcat owners one side only)
    • 2008-2015 Dodge Challenger (Hellcat owners one side only)
    • 2005-2015 Chrysler 300

    Choose the following finishes:
    • Machined Satin
    • Clear anodize
    • Black anodize
    • Red anodize
    • Blue anodize
    • Purple anodize
    • Burnt Orange anodize
    • Green

    Optional add on's:
    • Upgraded chrome plated mounting and fastening hardware
    • Custom engraving choices
    If you would like to have your kit engraved please email us to westcoastbolt@gmail.com

    This kit is not meant to be used with a strut bar.
    Machined from solid 6061-T6c certified domestic aircraft grade aluminum.

    This companion overflow breather catch can is designed to work with your boosted vehicle to catch any additional blow by that may not be trapped by the current BT PCV Catch Catch due to the additional boosted pressure put on the crank case. The BT overflow catch can is designed specifically to alleviate that pressure.

    This kit comes complete with the z bracket ready to be installed on to your current BT Catch Can only at the Z mount location at this time. All hardware, fittings, and breather are provided in this kit.

    Dress up under your hood with this fantastic 8 piece strut cover kit.

    Machined from certified domestic, solid 6061-T6 aircraft grade aluminum. The center cover is machined from 3 inch diameter solid aluminum and the matching satellites are machined from 1 inch diameter solid aluminum.

    If you are using a strut brace you may have to use a small amount of clear silicone for the small covers. All strut braces are different therefore, there may not be enough threading left to apply a secure fit (satellite pieces only).

    Using KW coil overs or other brands? Please be sure to indicate this in the proper drop down option when ordering.
    Fits all: 2005-present Chrysler 300, Dodge Charger, Challenger and Magnum.

    Billet Technology Underhood Engine Kit (2.7, 3.5, 3.6, 5.7, 6.1) Auto Transmission (2005-2015) Billet Technology Coil Pack Covers
    Check out this awesome engine bay setup for your Dodge Charger, Challenger, Magnum, or Chrysler 300. Fits 2005 to present model years for your 2.7, 3.5, 3.6 (Pentastar engines do not get A/C Ports) 5.7 or 6.1 Engine

    Package includes engine oil cap cover, power steering set, washer fluid cap, transmission cap cover, radiator cap cover, dipstick and low pressure ac port cap cover. Installation take minutes. We supply all sets screws, allen wrenches and pre applied industrial 3M Adhesive where necessary.
    2011-2012 Vehicles do not get a power steering reservoir covers.
    If you are interested in a custom image, logo, or wording on your under hood kit please email us your logo's images or requests to westcoastbolt@gmail.com for additional details.
    These coil pack covers fit your Hemi engines for 2006-2014 Dodge Charger, 2006-2008 Dodge Magnum, 2006-2014 Chrysler 300 and 2008-2014 Dodge Challenger.

    Machined from domestic certified, solid 6061-T6 aircraft aluminum. This coil pack cover kit is not welded or cast! This kit is offered in satin machine finish (the best in the industry), polish, clear anodize on satin, black, red, blue, purple, and burnt orange.

    If you are interested in a custom engrave please email us your logo or art work to westcoastbolt@gmail.com