Home > Clamps / Braided Hose / Fittings >

Titanium Hose/Piping Clamp
Titanium Hose/Piping Clamp


 
Alternative Views:





Product Code: TIHWC


Ti Hose Clamp Color:


Ti Hose Clamp Diameter*:


Qty:  
Description
 
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions.]

MARINE GRADE AND PROUDLY MADE IN THE USA!

ADJUSTABLE TITANIUM HOSE CLAMPS! STRONGER THAN STAINLESS STEEL, LIGHTWEIGHT AND CORROSION RESISTANT!

Titanium hose clamps feature a high strength (1/2 inch wide band) specifically engineered to allow for the highest torque rating possible. The rolled/flared edge of the band allows for smooth installation of the clamp and also prevents chaffing or tearing of the hose when tightening. The housing is the thickest possible to ensure stability of the screw during operation.

Hose Clamp Specifications:
• 100% Titanium construction. Screw, Housing, and Band.
• Screw head accepts: Phillips Head screwdriver, Flat Head screwdriver, Socket or wrench.
• Hi-Torque screw to reduce binding and galling.
• ½ inch wide Hi-Strength, flexible design band.
• Rolled/Flared band edges to prevent chaffing or tearing of hoses.
• Thick High-Stability Screw Housing to enhance performance and screw stability.

Color Options:
-Silver
-Burnt Classic- Half burns with mixes of it on the bolt area and clamp (Shown in photo).
-Burnt Blue- Heavy blue burns throughout the clamp body with possible color variation due to the design of the item.
-Burnt Purple- Heavy purple burns throughout the clamp body with possible color variation due to the design of the item.
-Burnt Bronze-Heavy bronze burns throughout the entire bolt and body with possible color variation due to the design of the item.

Standard to Metric Diameter Guide (Approximate Measurements):

•7/16 inch -11/16 inch (~11 mm - 17.50 mm)
•5/8 inch -15/16 inch (~16 mm - 23.81 mm)
•7/8 inch - 1*1/4 inch (~22.23 mm - 31.75 mm)
•1*1/16 inch - 1*1/2 inch (~27 mm - 38.1 mm)
•1 inch - 2 inch (~25.4 mm - 50.8 mm)
•1*1/2 inch - 2*1/2 inch (~38.1 mm - 63.5 mm)
•2*3/4 inch - 3*3/4 inch (~69.85 mm - 95.25 mm)
•3*1/2 inch - 4*1/4 inch (~88.90 mm - 108.00 mm)
•4 inch - 5*1/2 inch (~101.60 mm - 139.70 mm)
•4*1/2 inch - 6 inch (~114.30 mm - 152.40 mm)
•5.375 inch - 6.5 inch (~136.50 mm - 165.1 mm)

This is merely a guide. Make sure to measure the outer diameter of where the clamp is installed and match the clamps being purchased up with your current setup.

[Disclaimer]: ALL Orders are Bespoke, Custom Orders and Returns and Refunds are not available.

Share your knowledge of this product. Be the first to write a review »