Hood Prop Dress Kit (Hardware Only)
Own a hood prop, but are using Home Depot quality hardware or nothing at all? West Coast Fasteners has a legit solution that will securely hold the hood prop in place in style!
The following comes with the kit (Actual Hood Prop not included):
-1 Bolt
-1 Tapered Washer
-1 Easy install/uninstall Nut with washer*
*No tools required for assembly for easy setup and tear down at a car show.
**The picture is shown with a Hood Prop that is sold separately.
**The hood prop kit will fit most hood props out on the market and we have confirmed fitment for West Coast Creationz and PROPR hood props. As long your hood latch allows a 7 mm (0.275 inch) shaft to slide through it should work. Please e-mail in specs of your current setup if you are unsure on fitment.
Door Prop Dress Kit (Titanium)
Do you have a set of Door Props and would like to make install/uninstall by hand easy and to also make sure the final fit and finish is perfect and professional? West Coast Fasteners has your solution right here.
The following comes with the kit:
-2 Bolts (4 for 4-doors)
-2 Washers (4 for 4-doors)
-2 Custom Nut/Bolts (4 for 4-doors)*
*No tools required for assembly for easy setup and tear down at a car show.
Titanium Burnt Bolt Color Guide:
-Burnt Classic (Traditional style burn with half of the head burnt)
-Burnt Gold (Top of head is full gold)
-Burnt Blue (Top of head is full blue)
-Burnt Purple (Top of head is full purple)
-Burnt Bronze (Top of head is full bronze)
-Burnt Gunmetal (Top of head is full gunmetal)
What is a WCF Proof Card?
-West Coast Fasteners Proof Cards are hand signed and stamped Certification cards authenticating your rare hardware purchase. What better way is there than to encapsulate your masterpiece by separating yourself from the rest with authentication and certification?
Your door prop should allow an approximately 7.85 mm (0.31 inch) shaft to slide in or through.
Door Prop Bolt Dress Kit (Stainless Steel)
Do you have a set of Door Props and would like to make install/uninstall by hand easy and to also make sure the final fit and finish is perfect and professional? West Coast Fasteners has your solution right here.
The following comes with the kit:
-2 Bolts (4 for 4-doors)
-2 Washers (4 for 4-doors)
-2 Custom Nut/Bolts (4 for 4-doors)*
*No tools required for assembly for easy setup and tear down at a car show.
Your door prop should allow an approximately 7.85 mm (0.31 inch) shaft to slide in or through.
Car Show / Information Stand Sign
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions]. Lead times will vary and are not guaranteed so plan ahead.
Each stand is made out of light gauge mill finished with a sanded/brushed finish. You can leave it as is or get it powdercoated, painted, or polished with minimal prep work. The standard display has a 10"x14" surface topped with a clear lexan to protect and hold your Printout in place. The stand breaks down into that 3 pieces and can be assembled in under 2 minutes. Simply slide the stand under a front tire or weights.
Hundreds have already been made for Automotive Groups, Car Dealerships, Performance Driving Schools, Restaurants, Storefronts, Vendor Booth Displays, Raffles, etc.
[The sign is offered in different styles]:
1) Blank Front Panel (No raised Standoff with the front completely flat)
2) Blank Front Panel on Raised Standoff (Middle section is raised with no logo/font cutout)
3) *Custom Logo/Font Cutout Front Panel on Raised Standoffs with a Backing Plate to give a 3D look with the backing plate adding depth**
*The custom Logo cutout artwork must be approved and the $135 cost for doing so is with an image file that the artist is able to work with. If we have to aid in creating the final image file, additional fees will apply (Non-refundable).
**The Backing Plate allows one to add more depth/contrast against the front panel cutout especially if one decided to paint/powdercoat the backing plate for contrast as shown in the original product photo.
[Item as shown in the main photo]:
-10x14 Display Top
-Mopar Custom Logo Cutout on front panel with a black painted backing plate
-Custom WCF Hardware kit in black
Car Show Wheel Stand
Show off your brakes and suspension components! CNC machined from 5/8" thick 6061-T6 aerospace grade aluminum, this stand will not bend or crack under load. Each stand is made to order for your specific application.
(Please select the following):***
-Correct P.C.D. for your vehicle.
-Stand Height Desired (Measure from center bore of hub to the floor/ground).
The standard overall height of the stand is 18 inches (15 inches from center bore to ground) with an 8 inch base. The standard stand will use a 30 degree taper which mates with the typical aftermarket lug nuts. Please email us if you require any specific modifications to the stands such as height and lug nut angle.
***Please put the following information in the notes if possible during checkout. We will have to confirm this information prior to production.
-Center bore measurement
-Year, Make, and Model
-Stud Size
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions]
(
