Kriss USA Vector Picatinny Handstop Bolt Dress Kit (Bolt Only)
Add some flare to your existing Kriss USA Picatinny Handstop by upgrading the screw to a cool colorway.
[The following comes in this kit]:
-1 Bolt that attaches to an existing Kriss USA Handstop
*The Kriss USA Vector, Handstop, etc are shown as an example and sold separately.
Sample photo shows a Burnt Classic Finish (Half-Burn) Ti Screw.
Magpul QD Sling Attachment M-Lok Bolt Dress Kit
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions]. Lead times will vary and are not guaranteed so plan ahead.
Do you already own the Magpul Industries Sling Attachment, but would like to add some color to it or even fully upgrade to some Grade 5 Titanium Screws? West Coast Fasteners has you covered.
[The following comes with this Bolt Dress Kit]:
- 2 Bolts
- 2 Lock Nuts (M-Lok style)
- The Magpul QD Sling Attachment is an optional Upgrade otherwise it is just the Bolt Kit Only
The picture shows the hardware installed on the Magpul Sling Attachment which is sold separately unless you opt for it to be included in the drop down. This item ONLY includes the Bolt Dress Kit which is defined above.
Magpul M-Lok Rail Section Aluminum Bolt Dress Kit (Bolts Only)
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions.]
[The following comes with the kit depending on how many slots your Magpul Indsustries Rails have]:
-3 Slots = 2 Bolts, 2 nuts
-5 Slots = 2 Bolts, 2 nuts
-7 Slots = 2 Bolts, 2 nuts
-9 Slots = 2 Bolts, 2 nuts
-11 Slots = 3 Bolts, 3 nuts
The Magpul M-Lock Rail Section(s) are sold separately. The photo just shows the bolts installed for sample purposes only. This Bolt Dress Kit only include the bolts as shown above depending on the number of slots chosen.
Magpul M-Lok Rail Section Titanium Bolt Dress Kit (Bolts Only)
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions]. Lead times will vary and are not guaranteed so plan ahead.
[The following comes with the kit depending on how many slots your Magpul Indsustries Rails have]:
-3 Slots = 2 Ti Bolts, 2 nuts
-5 Slots = 2 Ti Bolts, 2 nuts
-7 Slots = 2 Ti Bolts, 2 nuts
-9 Slots = 2 Ti Bolts, 2 nuts
-11 Slots = 3 Ti Bolts, 3 nuts
The Magpul M-Lock Rail Section(s) are sold separately. The photo just shows the bolts installed for sample purposes only. This Bolt Dress Kit only include the bolts as shown above depending on the number of slots chosen. Firearm is NOT included with the sale.
Vara Safety Reach Car Mount Cable and Combination Lock (No Mount)
West Coast Fasteners provides an additional layer of security for the Vara Safety Car Mount. The car mount bracket bolts down using the front seat bolt, but this upgrade allows you to also secure the bracket to another section of the vehicle.
[The following comes with the kit]:
- Security Cable Wire
- ~40 inches in length
- ~1/8 inch in diameter for bracket clearance
- Combination Lock
The Vara Safety Reach, Reach2, Reach2S, Car Mount, etc are NOT included and sold separately by Vara Safety directly. The bracket on the car mount needs minimal clearance to allow for the Security Cable Wire to initially looped into the bracket. A file, dremel, or drill bit can easily be used.
Magpul M-Lok AFG Bolt Dress Kit
[All sales are Bespoke/Custom and are FINAL. Once the order is placed, you have 24 hours to cancel since the funds will be used for setup and material. By placing your order, you agree to these terms and conditions]. Lead times will vary and are not guaranteed so plan ahead.
Do you already own the Magpul Industries M-Lok AFG, but would like to add some color to it or even fully upgrade to some Grade 5 Titanium Screws? West Coast Fasteners has you covered.
[The following comes with this Bolt Dress Kit]:
- 2 Bolts
- 2 Washers
- 2 Lock Nuts (M-Lok style)
- 2 Gaskets (Cut to fit if desired to make the AFG fit even more snug than factory if needed)
- Magpul M-Lok AFG is an OPTIONAL Upgrade otherwise it is just the Bolt Kit Only.
The picture shows the hardware installed on the Magpul M-Lok AFG which is sold separately unless you opt for it to be included in the drop down. This item ONLY includes the Bolt Dress Kit which is defined above.
Recover Tactical 20/20 & 20/20N Stabilizer Kit/Brace Bolt Dress Kit (Bolts Only)
Do you own a Recover Tactical 20/20 or 20/20n Stabilizer Kit/Brace and want to customize the look of it a bit more to match the rest of your theme or to add a bit more spice? West Coast Fasteners has you covered to bring the exposed Bolts and Nut up to par with what you are looking for.
[The following comes with the bolt dress kit]:
- 3 Bolts
- 1 Flat Bolt
- that installs on the Frame near the trigger guard that tightens to the nut to keep tension
- 2 Bolts (1 per side)
- that attach to where the Picatinny Slide Rails go. It also works for the UR20 if you purchased that upgrade as well.
- 1 Nut
- The Stabilizer/Brace is NOT INCLUDED and sold SEPARATELY
This kit was fitted on the Glock Applications, but may fit other models since this kit was duplicated from Recover Tactical's Spare Hardware Kit and the ones we run on our glocks. We recommend reaching out to Recover Tactical directly to see if your specific model has the same hardware.
Photos shown have the Titanium Screws installed in the Burnt Classic Finish (Half-burn).
Kriss USA Side Rail Mount Hole Bolt Dress Kit (Bolts Only)
Do you have a Kriss USA Vector and want to give it some flare by covering up the Side Rail Mount Holes? West Coast Fasteners has you covered.
[The following comes with the kit]:
-4 Bolts (2 Per side)
*The Kriss Vector, Picatanny Handstop Bolt Kit, and suppressor are shown as an example and sold separately.
**Screws shown are in the Ti Burnt Classic Finish (Half-burn)
Vara Safety Reach Car Mount Bolt Dress Kit (Hardware Only)
Do you own the Vara Safety Reach 2 Car Mount and want to upgrade the hardware so there is contrast or to match your interior? The screws and nuts are also upgraded to Grade 5 Titanium.
[The following comes with the kit]:
-2 Titanium Nuts
-2 Titanium Bolts
-4 Finishing Washers
The Vara Safety Reach, Reach2, Reach2S, and Car Mount Adapter are sold separately. This kit is for what is listed above only.
Daniel Defense Rail Interface System II (RISII) Titanium Screw Upgrade (Bolts Only)
Do you own a Daniel Defense Rifle or Pistol and would like to upgrade the hardware or replace some old worn out hardware with Grade 5 Titanium?
[The following comes with the kit]:
-6 Titanium Screws*
*The Upper Receiver and Handguard is sold separately by Daniel Defense. The screws in this kit are a few millimeters shorter than what comes come from the factory for ease of install. The Allen Key aids with install, but you may need another tool for final tightening.
CAA Gearup MCK 1 & 2 Roni Bolt Dress Kit (Hardware Only)
Do you own a CAA MCK 1 or CAA MCK 2 Micro Roni for your pistol and would like to add some more customized flare to it? West Coast Fasteners has a Bolt Dress Kit for you in Titanium and Aluminum that will take your system to the next level.
[The following comes with the kit]: (CAA MCK 1 or 2 Sold Separately; Hardware listed below only)
-13 Bolts and 5 Nuts
According to CAA Gear Up. This bolt dress kit will fit the MCK 1 and MCK 2, but we recommend checking with them if you are unsure. Pictures show the bolts installed on a MCK 2 for a Glock. The pictures in the item listing currently show the CAA MCK2 for the Glock Chassis.